Right hand drive brake correctors now in stock

Due to popular demand we have made a new batch of brake correctors.

Take a look at the eBay listing below for more information.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=161368879839

Thanks Neil,

Have ordered one - hoping its not too difficult to install!

I wasn't aware there was anything wrong with the brake pedals. Can't believe I need less effort to stop it, it's easy enough now. Id have thought any more leverage and I'd be licking up. But intrigued.

It's very easy to install,

The pedal corrector removes excessive pedal travel rather than make it easy

neillitesteer wrote:

It's very easy to install,

The pedal corrector removes excessive pedal travel rather than make it easy

Ah, in that case I am interested.

Oh hang on a minute, does that mean I'm actually going to have to get under my van and get dirty? Not so sure now...

Sunny wrote:

neillitesteer wrote:

It's very easy to install,

The pedal corrector removes excessive pedal travel rather than make it easy

Ah, in that case I am interested.

Oh hang on a minute, does that mean I'm actually going to have to get under my van and get dirty? Not so sure now...  

Can result in dirty fingernails! however this is offset with the overwhelming sense of achievement   

bought hopefully wont get ankle ache from the pedal height now

Neil, may seem stupid question but in the pictures the "after" has the foot very low down. It doesn't seem like there's much room for pedal travel when applying the brakes. No danger of bottoming out is there?

The low pedal is before the high pedal is after

  Hi Neil hope you've kept one for Bonnie !!, Brenda

bonnie blue wrote:

  Hi Neil hope you've kept one for Bonnie !!, Brenda

Not only that but we used your van for the eBay add

Have installed the new brake "corrector". Much prefer the drive with it - much more responsive and easier to do gentle braking, more like a car. Would say it was £30 well spent, and took me about an hour to fit (didn't jack up bus, and had to remove a metal protector panel to remove the clevis bolt).

Am wondering if there is a way to lower the brake pedal now, to be more inline with accelerator - hadn't noticed this until the brakes started working!

Thanks for the review,

To lower the pedal you need to shorten the pushrod and adjust the pedal stop.